Products

Concrete and Terrazzo Floor Care Kit

Tricon Diamond Pad + Polycrystal Floor Cleaning Pad


Restoration/Deep cleaning Steps:

Tricon Diamond Pad 1#

Tricon Diamond Pad 2#

Tricon Diamond Pad 3#


Daily Maintenance Steps:

Medium 2# : White Pad / Orange Pad

Fine 3# : Yellow Pad / Blue Pad

XFine 4# : Green Pad / Pink Pad


Recommended Machine:

Scrubber dryer machine

Single disc machine with 150-400 RPM

Orbital machine

  • Description
  • Instruction Video

Concrete floor care kit is a complete solution to help you restore, clean and shine the concrete and terrazzo floor. Especially for industrial concrete floors like warehouse and commercial concrete floors like Plaza.


Tricon Diamond Pad is a diamond polishing pad that can help you remove deep etch scracthes, black tyre marks left by vehicles and leave a clean surface. If you can keep using Trishine Pad or Supershine Pad on a daily basis then it will keep the shine longer. 


Application Steps

Step 1

·Tricon Diamond Pad 1#, 6 passes with water

·Remove deep scratches and stains


Step 2

·Tricon Diamond Pad 2#, 6 passes with water

·Make a clean floor surface


Step 3

·Tricon Diamond Pad 3#, 6 passes with water

·Remove small scratches


Step 4

·White Pad or Orange Pad6 passes with water

·Leave a well-prepared surface


Step 5

·Yellow Pad or Blue Pad6 passes with water
·Leave a matte-finish surface


Step 6

·Green Pad or Pink Pad6 passes with water
·Leave a satin-finish surface

Step 7

·Concrete Guard / Sealer

·Spray concrete guard or sealer then mop it evenly


Step 8

·When Guard or sealer gets dry, follow with Grey Pad or Pink Pad, 

6 passes dry burnishing by high-speed burnisher

·Leave a mirror-finish surface
·Daily cleaning with Green or Pink or Grey pad, 1 step, wet use


Frequency Advice

As for restoration steps,

Tricon Diamond Pad, Once in two months, 6 passes, with water only


As for daily maintenance steps,

·White Pad/Green Pad or Orange Pad/Blue Pad, 1 step, wet use, in every 5-7 days, 2 passes

·Grey Pad/Pink Pad, 1 step, wet use, in every day, 1 pass


Case Study

All the floor cleaning, maintenance and polishing cases below are made with water only. Welcome to visit our Solution Page to check more cases.

>>Concrete Floor Grinding and Polishing 


Factory





Airport






Request a Demo

Tell us a little about yourself, and we'll be in touch to schedule a virtual or in-person demonstration with a local EZSHINE expert.
related products
marble polishing pads
Marble Stone Floor Care Kit
Mshine Marble Pad + Polycrystal Floor Cleaning Pad Restoration/Polishing Steps: Mshine Marble Pad 50# - 3000# Daily Maintenance Steps: Medium 2# : White Pad / Orange Pad Fine 3# : Yellow Pad / Blue Pad XFine 4# : Green Pad / Pink Pad Recommended Machine: Heavy-duty Single disc machine (100-300KG, for restoration steps) Scrubber dryer machine (only for daily maintenance steps )
floor stripping pads
0# EZstrip Pad (High-Performance)
·Most aggressive stripping pad to remove deep scratches and hard stains ·Strip away old coatings/finishes from coated and uncoated floors ·Leave a clean and well-prepared surface Recommended machine: Scrubber dryer machine Single disc machine with 150-400 RPM Floor Oscillating / Orbital machine
diamond floor pads
Maintenance Pad (Standard-performance Kit, 4 Steps)
· Coarse 1# : Red Pad · Medium 2# : White Pad · Fine 3# : Yellow Pad · XFine 4# : Green Pad Recommended machine: Scrubber dryer machine Single disc machine with 150-400 RPM Orbital machine High-speed burnisher up to 3000 RPM (Green Pad Only)
twister retail blue
3# Blue Pad (High Performance)
· The polishing step in light-duty floor renovation and polishing case · Leave a satin surface after initial polishing · Prepare for the final higher clarity and gloss polishing Recommended machine: Scrubber dryer machine Single disc machine with 150-400 RPM Floor Oscillating/Orbital machine
diamond floor pads
1# Red Pad (Standard Performance)
· Deep cleaning as a preparation step on worn and dirty floors · Very aggressive to remove deep scratches and hard stains · Leave a clean and well-prepared surface after working Recommended machine: Scrubber dryer machine Single disc machine with 150-400 RPM Floor Oscillating / Orbital machines
floor scrubbing pad
2# White Pad (Standard Performance)
· Scrubbing step to remove small scratches · As an important transition step between deep cleaning and polishing · Leave a clean and matte surface Recommended machine: Scrubber dryer machine Single disc machine with 150-400 RPM Floor Oscillating / Orbital machine
diamond cleaning pads
4# Green Pad (Standard Performance)
· Daily cleaning and final polishing · Leave a high gloss end · Keep the shine longer and higher on a daily basis cleaning Recommended machine: Scrubber dryer machine Single disc machine with 150-400 RPM Orbital machine High-speed burnisher machine up to 3000 RPM
diamond floor pads
2# Orange Pad (High Performance)
· Scrubbing and maintenance step to remove small scratches · As an important transition step between deep cleaning and polishing · Leave a clean and matte surface Recommended machine: Scrubber dryer machine Single disc machine with 150-400 RPM Floor Oscillating / Orbital machines
Request a Demo
welcome to EZshine
Tell us a little about yourself, and we'll be in touch to schedule a virtual or in-person demonstration with a local EZSHINE expert.

Home

Products

about

contact